Seachem PrimeRegular price Dhs. 27.50 Save Dhs. -27.50
Seachem StabilityRegular price Dhs. 27.50 Save Dhs. -27.50
Seachem Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate. The bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use. Stability is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management.
The bacteria used in competing products are inherently unstable. The conditions necessary for their growth and development fall into a very narrow range of temperatures, pH, organic loads, etc. When any of these parameters are not strictly within the proper range, the bacterial culture quickly crashes and dies. Stability is not limited this way. The necessary conditions for the growth of Stability's bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the undetected death of an organism), Stability simply becomes more effective.
Directions: Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. Product shelf life is 4 years from date of manufacture. Stability should ideally be used in conjunction with biological filtration such as Seachem Matrix. For emergency ammonia control, use Seachem AmGuard.
Seachem de-nitrateRegular price Dhs. 20.00 Save Dhs. -20.00
Seachem de❊nitrate is an economical, natural, porous material with a pore distribution and geometry that promotes both aerobic nitrification within the first few millimeters of depth and anaerobic denitrification at the core. The material has a high surface area and supports a high density of bacteria. Although de❊nitrate has capacity to trap nitrate, this, as with other nitrate retaining materials, such as certain zeolites and synthetic resins, is quite limited and the primary mechanism of nitrate removal is anaerobic. “Live” rocks or reef rocks remove nitrate by anaerobic denitrification. de❊nitrate removes nitrate by the same process. Efficiency is magnified several folds by forcing the water to filter through the porous de❊nitrate. As with reef rock, anaerobic conditions are achieved by the porosity and the depletion of oxygen by the aerobic process at the surface. Excessive flow rates should, therefore, be avoided, as they may impede development of an adequate anaerobic environment to support denitrifying bacteria. de❊nitrate is also an excellent media for aerobic nitrification and it makes an ideal biological filter in drip trays, canister filters, sumps, or even box filters. At high flow rates (greater than 100 US gallons per hour), it will function solely as an aerobic filter. At slow flow rates (less than 50 US gallons per hour), it will function as both an aerobic filter and an anaerobic denitrifying filter.
Directions: For best results, de❊nitrate should be placed to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 US gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once de❊nitrate has been in use for several days, nitrate concentrations should start to fall and level off gradually at a concentration of about 4–5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of de❊nitrate treats about 100–200 L (25–50 US gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.
Seachem SafeRegular price Dhs. 72.50 Save Dhs. -72.50
Seachem Safe is the complete and super-concentrated dry conditioner for both fresh and salt water. Safe removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Safe will not over-activate skimmers. Safe may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard. When adding new fish, use Stability. Both are ideal for use with Safe.
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem Digital Spoon Scale.
NOTE: These directions supersede all other prior packaging. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
JBL BiotopolRegular price Dhs. 22.50 Save Dhs. -22.50
JBL Biotopol is a water conditioner for freshwater aquariums. For setting up of new aquariums or for adding during water changes - this conditioner is suitable for fish and plants and also for turtle tanks. Also suitable for the strengthening fish after diseases. The product binds dangerous substances in tap water: neutralises copper, lead and zinc, as well as chlorine and chloramine for healthy water and healthy fish. It aids in the protection of mucous membrane, gills, skin and fins with added aloe vera. Protection against stress and strengthening of the immune system thanks to vitamin B complex.
To use: 10ml per 40litres of water.
Seachem Head Start Combo Pack (3x100ml)Regular price Dhs. 72.50 Save Dhs. -72.50
Seachem HeadStart Combo Pack is a pack of conditioners that combines 3x of Seachem's top-selling items, Prime, Stability, and Clarity, (each 100ml bottle size) into one convenient pack. Each plays an important role in initial set-up and maintenance of any aquarium. It’s great for any aquarist but is ideal for the beginner.
Seachem Prime: Prime is the complete and concentrated conditioner for both fresh and saltwater. Prime removes chlorine, chloramine and detoxifies ammonia. Prime converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Prime may be used during tank cycling to alleviate ammonia/nitrite toxicity. Prime detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them.
Seachem Stability: Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate.
Seachem Clarity: Clarity is the ultimate clarifier for both fresh and saltwater. It employs an advanced polymeric flocculating agent that is both reef and plant safe. Clarity contains compounds that will clear all types of cloudiness in all environments. Clarity contains both precipitating and flocculating agents in the same bottle, enabling all types of cloudiness to be removed in one dose. Clarity is the only clarifier on the market that does it all!
Seachem Neutral Regulator (250ml)Regular price Dhs. 45.00 Save Dhs. -45.00
Seachem Neutral Regulator
Seachem Clarity (250ml)Regular price Dhs. 48.00 Save Dhs. -48.00
Seachem Clarity is the ultimate clarifier for both fresh and saltwater. It employs an advanced polymeric flocculating agent that is both reef and plant safe. Clarity is the only clarifier on the market that does it all! Clarity will clear all types of clouding.
Many companies manufacture multiple products to clear up each type of cloudiness and each different environment (e.g. freshwater, marine, reef, etc.). Some companies have developed products that will clear most types of cloudiness, but their application requires two separate bottles of product. Clarity contains compounds that will clear all types of cloudiness in all environments.
Clarity contains both precipitating and flocculating agents in the same bottle, enabling all types of cloudiness to be removed in one dose. Upon adding Clarity to the water, you will see a cloudy haze begin to form. This is normal and means that Clarity is beginning to work. The water is filled with tiny pieces of floating matter that were not visible to the naked eye. Clarity makes those pieces of matter begin to clump together. As they clump together they form larger pieces of matter that are now visible, hence the cloudiness. Once this matter has clumped together, it is a simple matter of mechanical filtration to remove the residue. Matter that was once too small to get caught in filter media is now in large enough clumps. In order for Clarity to work effectively, you should have a filter with mechanical filtration (e.g., filter floss) connected to your aquarium.
Directions: Use 1 capful (5 mL) for every 80 L (20 US gallons). In some situations the cloudiness may increase after adding Clarity, however this is normal and is a sign that Clarity is actively working. Rapid clarification will follow (1–2 hours). In the case of chemical or particulate clouding clean filter floss or cartridge after tank clears.
JBL Biotopol PlusRegular price Dhs. 22.50 Save Dhs. -22.50
JBL Biotopol Plus quickly converts tap water into healthy aquarium water - specifically for tap water with a high chlorine content. This product is identical to JBL Biotopol, with the only difference being that it contains more chlorine binders for very high chlorine contents. Protects gills, skin and fins noticeably thanks to aloe vera plant extract. Vitamin B complex is proven to reduce stress in fish. Neutralises toxic heavy metals, e.g. copper, lead and zinc.
JBL Biotopol RRegular price Dhs. 22.50 Save Dhs. -22.50
JBL Biotopol R is a specialised water conditioner for goldfish. Used for setting-up new goldfish aquariums, water changes and strengthening goldfish after disease. This product binds dangerous substances present in tap water: neutralises copper, lead and zinc, as well as chlorine and chloramine for healthy water, which means healthy fish. Provides protection of mucous membranes, gills, skin and fins with aloe vera. Important vitamins of the B group support the normal function of the immune system. With eyebright extract euphrasia for the special protection of sensitive eyes.
To use: 10 ml/20 l water. Example for 60 l aquarium: 30 ml for setting-up, 10 ml for 1/3 water change every 2-3 weeks.
JBL TropolRegular price Dhs. 55.00 Save Dhs. -55.00
JBL Tropol is a tropical water conditioner for freshwater aquariums for setting-up and for water changes in the care of freshwater aquariums and shrimp tanks. Creates crystal-clear water, acting as a light filter that withdraws a part of the light radiation vital for algae. Healthy water, healthy fish: fosters good health in fish by using humic substances from peat and tannin from oak bark. Improves acclimatisation of all blackwater fish.
Use: 10 ml/40l water. Example for 60 l aquarium: 15 ml for setting-up, 5 ml for 1/3 water change every 2-3 weeks.
Transform your aquarium water into biotope-like water to protect the fish with natural substances, Tropol adds nature-identical substances to the tap water to make it similar to the natural waters of tropical ornamental fish with its many humic substances.
Seachem Marine Trace (250ml)Regular price Dhs. 42.00 Save Dhs. -42.00
Replenishment of a number of trace elements is required to maintain an environment ideal for the growth and reproduction of marine life, but while the importance of trace elements has been recognized by aquarists for many years, the physiological reasons are not fully understood. The chemical elements in seawater are varied, and, likewise their addition to the aquarium in trace quantities has varied effects on a variety of saltwater plant and invertebrate species. In general, though, these elements are important for metabolic processes and pigment formation. Addition of iron, for instance, has been shown to benefit coloring and growth for corals, anemones, and other photosynthetic animals.
Seachem Marine Trace supplies a broad range of trace elements demonstrated to be necessary for proper fish health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Marine Trace contains only those elements actually demonstrated to be required by fish.
*Nutrient Requirements of Fish, National Academy of Sciences, pp. 16-21,1993.
Directions: Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. Feed NutriDiet Marine Flakes and/or NutriDiet Marine Plus Flakes for optimal fish health.
Seachem Marine BufferRegular price Dhs. 24.50 Save Dhs. -24.50
Seachem Marine Buffer will safely raise marine pH to 8.3. It will not raise pH above 8.3 even if inadvertently overdosed. Marine Buffer is a blended product and is not just sodium bicarbonate or sodium carbonate, commonly sold as a substitute. Such products can raise pH to dangerous levels if not used properly. Marine Buffer contains sodium, magnesium, calcium, strontium, and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate. Use Seachem’s MultiTest Marine pH & Alkalinity to check pH and total alkalinity. Use Marine Trace to restore the proper level of trace and feed NutriDiet Marine Flakes for thriving, healthy saltwater fish. Total Alkalinity is a measurement of three main ions: carbonate, bicarbonate, and borate. In saltwater, bicarbonate drives the pH toward 7.8, carbonate drives pH toward 9.1, and borate toward 9.5 or more. Because of the chemistry of buffering systems, the closer you get the pH to the pK of a buffering system, the harder it is for the pH to shift. So, if you blend a buffer so that the combined product drives the pH toward 8.3, then the more you use, the more stable the pH becomes. That is the principle behind Marine Buffer. It is a blended buffer that drives and holds your pH at 8.3 because of the blend. The catch to this seemingly simple solution is that most salt mixes contain substantial amounts of bicarbonate salts. This shifts the pK of the buffering system further towards 7.8, and a buffer that shoots for 8.3 will never quite get there. Thus, the pK of Marine Buffer is actually slightly higher than 8.3 in order to combat the influx of bicarbonate at every water change. Marine Buffer was the first buffer on the market which contained borate salts (which make a saltwater buffering system much more stable), and Marine Buffer remains the most effective pH buffer on the market for marine aquaria.
Directions: Add 5 g (1 level teaspoon) for each 80 L (20 US gallons). For precise dosing, use the Seachem Digital Spoon Scale. Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use biweekly or monthly to maintain a pH of 8.3.
If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer that does not dissolve within ~15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.
Seachem Malawi/Victoria Buffer (300g)Regular price Dhs. 46.50 Save Dhs. -46.50
Seachem Malawi Victoria Buffer is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing carbonate hardness, buffer capacity, and pH. It is formulated to maintain a pH of 7.8–8.4. For optimum replication of the Malawi/Victoria Lake environment, use with Cichlid Lake Salt, Cichlid Trace, and NutriDiet Cichlid Flakes.
Directions: Use 6 g (one level teaspoon) for each 40 to 80 L (10 to 20 US gallons) of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks. For precise dosing, use the Seachem Digital Spoon Scale.
TIPS: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachem’s Cichlid Lake Salt) and between water changes as needed to maintain pH. Seachem’s Malawi/Victoria Buffer is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachem’s Acid Buffer in combination with Malawi/Victoria Buffer. To attain a higher pH than 8.4, use Tanganyika Buffer.
Seachem Liquid Marine Buffer (250ml)Regular price Dhs. 43.50 Save Dhs. -43.50
Seachem Liquid Marine Buffer will safely raise marine pH to 8.3 while adjusting alkalinity. It will not raise pH above 8.3 even if inadvertently overdosed. Liquid Marine Buffer contains a balanced blend of bicarbonate, carbonate and borate salts designed to raise pH and restore disrupted buffer systems to the proper balance. Use Seachem’s MultiTest Marine pH & Alkalinity to check pH and total alkalinity. Use Marine Trace to restore the proper level of trace and feed NutriDiet Marine Flakes for thriving, healthy saltwater fish.
Seachem Liquid Marine Buffer shares the same blend as Marine Buffer powder; thus, it confers the same benefits. It is a blended buffer that drives and holds your pH at 8.3 because of the blend. The pK of Liquid Marine Buffer is actually slightly higher than 8.3 in order to combat the influx of bicarbonate at every water change.
Directions: Use 1 capful (5 mL) for every 20 L (5 US gallons) daily until pH stabilizes at 8.3. This may take from a day to a week depending on original pH, alkalinity and buffer system balance. Thereafter, use as needed to maintain pH.
Seachem SeaGel (1L)Regular price Dhs. 132.50 Save Dhs. -132.50
Seachem SeaGel is a blend of MatrixCarbon and PhosGuard and is is optimized specifically for aquaria where organic color body and acid removal is required without the introduction of phosphate. MatrixCarbon is an ultracapacity carbon for the removal of organic and color impurities. PhosGuard is a powerful remover of phosphate, silicate, toxic metals, and acids. Both components are bead shaped for optimum water flow characteristics and penetration. The components enhance each other and are ideal for reef and marine use. SeaGel may also be used in freshwater that is not phosphate buffered. SeaGel is optimized specifically for aquaria where organic color body and acid removal is required without the introduction of phosphate.
Although MatrixCarbon has the lowest detectable leachable phosphate content of all major carbon brands tested, some phosphate is still released. Adding PhosGuard to the mix compensates for this. Both components are bead shaped for optimum water flow characteristics and penetration. The components enhance each other and are ideal for reef and marine use.
Directions: Use 250 mL for each 150–225 L (40–60 US gallons). For best results, SeaGel should be placed so as to maximize the flow of water through it. Use in a filter bag such as Seachem’s Zip Bag. Rinse in freshwater before use. Use caution, since product will fizz and heat on initial wetting. SeaGel will function 3–4 months.
JBL Acclimol (250ml)Regular price Dhs. 55.00 Save Dhs. -55.00
JBL Acclimol (250ml) is a water conditioner to support the acclimatisation of fish in freshwater aquariums and reduce stress levels when adding new fish, maintenance work or changes in the aquarium or for fish transportation. Provides support of the immune system thanks to multivitamin complex with vitamin C. Healthy water, healthy fish: protection of mucous membranes, gills, skin and fins by means of protective colloids. Prevention of iodine deficiency symptoms thanks to iodine complex.
Recommendation for acclimatisation:
Switch off aquarium lighting, attach the opened transport bag with a clip, add aquarium water in portions into the bag every 1/4 hour, put a dosage of JBL Acclimol into the aquarium before inserting the fish, use a net to move the fish from the bag into the aquarium, let the fish swim out of the net on their own. Pour the transport water down the drain and not into the aquarium. Switch on the aquarium lighting one hour later.
To use: 10 ml/40 l water. Example: in a 60 l aquarium: 15 ml for setting up a new aquarium, 5 ml for 1/3 water change every 2-3 weeks.
JBL DenitrolRegular price Dhs. 55.00 Save Dhs. -55.00
JBL Denitrol is a bacteria starter for adding aquarium fish to freshwater and saltwater aquariums. Fish need to be as comfortable in the aquarium as they are in nature. When setting up an aquarium and during partial water changes the aquarium needs sufficient bacteria to be biologically cleaned and to quickly break down harmful substances. Bacterial starters contain highly active beneficial bacteria which break down the ammonium/ammonia and nitrite as well as the fish excrements and other waste in the water.
Shake the bottle well, measure the right amount in the dosing lid and evenly distribute in the aquarium
Live bacteria with enzymes for the rapid breakdown of pollutants
Healthy water, healthy fish: breakdown of fish excrement and other waste by means of special enzymes and cleansing bacteria
Use: 10 ml for 20 l water during initial setup and disease, 10 ml for 300 l water during water change
JBL ClearolRegular price Dhs. 29.50 Save Dhs. -29.50
JBL Clearol is a water clarifying conditioner for crystal-clear water. Eliminates micro-fine cloudiness, which normally can’t be collected from the filter, such as smallest floating particles (white cloudiness), water bloom (green cloudiness) and bacterial cloudiness. Turbidity sinks to the bottom and can be siphoned or collected from the filter.
Tip: clean filter more frequently to remove solid turbidity. Use with pH levels over 6 and KH levels over 5° dKH
Contents: 1 bottle Clearol. To use: 10 ml/40 l water.
JBL ClynolRegular price Dhs. 24.50 Save Dhs. -24.50
JBL Clynol is a natural water conditioner for cleaning and clarifying fresh and saltwater aquariums. Cleans and clarifies, eliminates discolouration and cloudiness, uses minerals to bind heavy metals, ammonium, proteins and odours.
Healthy water, healthy fish: promotes the well-being of the aquarium dwellers
Initial cloudiness disappears after 2-24 hours and the water turns crystal-clear
To use: weekly 10 ml/40 l water. Example: in a 60 l aquarium: 15 ml. For more serious occurances: 10 ml/40 l
JBL PhosEx RapidRegular price Dhs. 30.50 Save Dhs. -30.50
JBL PhosEx Rapid is a phosphate remover for freshwater aquariums and pond water to suit both fish and plants. This product reliably binds phosphate and thus prevents unwanted algae growth. Also suitable for turtle and shrimp tanks. How it works: a liquid iron compound reliably and permanently binds the phosphate dissolved in the water. Its effectiveness is shown by a brownish clouding, which disappears after 2-24 h.
To use: 10 ml/40 l water for >2.4 mg/l phosphate. Example: 60 l aquarium: 15 ml. For > 1.2 mg/l 10 ml/80 l and for > 0.6 ml/l 10 ml/160 l
JBL AlgolRegular price Dhs. 36.00 Save Dhs. -36.00
JBL Algol is a water conditioner to combat algae in freshwater aquariums. For beautiful freshwater aquariums use this product to combat all algae species fast and intensively without causing harm to fish and microorganisms when used correctly.
Application only in the morning. Before use a partial water change of 30 % is recommended. Ensure sufficient oxygen content by means of aeration during the treatment.
To use: 10 ml/40 l water. Example with 60 l aquarium: 15 ml.
JBL pH-PlusRegular price Dhs. 28.50 Save Dhs. -28.50
JBL pH-Plus is a water conditioner to increase the pH value fish and invertebrates in fresh and saltwater aquariums. Rapid raising of the pH value and stabilisation through increase of the carbonate hardness.
Use in freshwater: can be used as often as needed to raise the carbonate hardness in too soft water to the desired value. Maximal increase of the pH value to 8.5
Use in saltwater: adjusts the carbonate hardness to the natural ocean value of 10 to 12 °d KH and thus adjusts the required pH value of 8.0 to 8.4
To use: 10 ml/40 l water. Results into an increase of approximately 1° dKH
JBL pH-MinusRegular price Dhs. 28.50 Save Dhs. -28.50
JBL pH-Minus is a water conditioner to reduce the pH value in freshwater aquariums. Rapid decrease of the pH value thanks to natural oak extract, phosphate-free. The ideal pH value for most freshwater fish and plants is in the neural range around 7.
Top Tip: the carbonate hardness should be at least 4 °dKH
Use with pH values >8: 10 ml/40 l water, pH value 7-8: 10 ml/80 l water, pH values <7: no adding of JBL pH-Minus
To use: 10ml/40 l water.