Seachem PrimeRegular price Dhs. 27.50 Save Dhs. -27.50
Seachem StabilityRegular price Dhs. 27.50 Save Dhs. -27.50
Seachem Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate. The bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use. Stability is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management.
The bacteria used in competing products are inherently unstable. The conditions necessary for their growth and development fall into a very narrow range of temperatures, pH, organic loads, etc. When any of these parameters are not strictly within the proper range, the bacterial culture quickly crashes and dies. Stability is not limited this way. The necessary conditions for the growth of Stability's bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the undetected death of an organism), Stability simply becomes more effective.
Directions: Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. Product shelf life is 4 years from date of manufacture. Stability should ideally be used in conjunction with biological filtration such as Seachem Matrix. For emergency ammonia control, use Seachem AmGuard.
Dymax Anti-Ammonia RockRegular price Dhs. 30.00 Save Dhs. -30.00
Dymax Anti-Ammonia Rock is a natural filter media capable of absorbing Ammonium, Nitrite, Nitrate in water rapidly, keeping aquarium fish tank and ponds safe for fishes. Suitable for use in freshwater aquariums and ponds, these anti-ammonia rocks. Helps remove ammonia rapidly while maintaining the aquatic pH value. Removes unpleasant odours and prevents fish life from being poisoned by unsanitary water.
Dymax Actived CarbonRegular price Dhs. 26.00 Save Dhs. -26.00
Dymax Active Carbon is a chemical filtration media that treats water and remove impurities, eliminates smell, improve colour and remove chemicals in aquarium water. With twice the ability than ordinary carbon, this PH-Neutral Active Carbon breaks down carbolic acid, tannic acid and chlorine in tap water. Suitable for most filtration and ideal in fresh water environments. Activated carbon works by using absorption and adsorption. Absorption is the process by which pollutants are trapped in the pores of the carbon (you can think of this process as a molecular-sized mechanical filter). Adsorption occurs because the carbon has a large surface area (with all the pores) and, therefore, many chemical bonding sites. Adsorption is the process by which pollutants are chemically bonded to these sites and trapped by the carbon. It is important to understand that there are several important toxins that activated carbon does not remove. Most notably, it does not move ammonia, nitrite, or nitrate. Therefore, it does not aide in toxin removal during the initial aquarium setup. 500g package.
JBL ProSilent a-SeriesRegular price Dhs. 162.50 Save Dhs. -162.50
The JBL ProSilent a-Series is a range of air pumps for freshwater and saltwater aquariums to support the health and wellbeing of fish and plants inside the aquarium. Package contents: air pump for freshwater and saltwater aquariums from 40 up to 150 l, Pro Silent a100, incl. 2 m air hose, check valve, air stone
JBL ProSilent a100 - for aquariums from 40 up to 150 litres. TÜV tested, powerful: 100 l/h air output with > 160 mbar air pressure with only 2.9 W consumption, check valve prevents backflow of water into the pump, 2m air hose.
JBL ProSilent a200 - for aquariums from 50 up to 300 litres. TÜV tested, powerful: 200 l/h air output with > 160 mbar air pressure with only 3.5 W consumption, check valve prevents backflow of water into the pump, 2m air hose.
JBL ProSilent a300 - for aquariums from 100 up to 400 litres. TÜV tested, powerful: 300 l/h air output with > 160 mbar air pressure with only 3.9 W consumption, check valve prevents backflow of water into the pump, 2m air hose.
JBL ProSilent a400 - for aquariums from 200 up to 600 litres. TÜV tested, powerful: 400 l/h air output with > 160 mbar air pressure with only 5.5 W consumption, check valve prevents backflow of water into the pump, 2m air hose.
These pumps are easy to install, simply connect pump with air hose and air stone. Mount pump outside aquarium, place air stone inside the aquarium. Reduced noise level: noise suppression air chamber, vibration dampening silicone feet, reinforced housing wall, adjustable air outlet, 90° rotatable air connection with hose screw connection.
Seachem de-nitrateRegular price Dhs. 20.00 Save Dhs. -20.00
Seachem de❊nitrate is an economical, natural, porous material with a pore distribution and geometry that promotes both aerobic nitrification within the first few millimeters of depth and anaerobic denitrification at the core. The material has a high surface area and supports a high density of bacteria. Although de❊nitrate has capacity to trap nitrate, this, as with other nitrate retaining materials, such as certain zeolites and synthetic resins, is quite limited and the primary mechanism of nitrate removal is anaerobic. “Live” rocks or reef rocks remove nitrate by anaerobic denitrification. de❊nitrate removes nitrate by the same process. Efficiency is magnified several folds by forcing the water to filter through the porous de❊nitrate. As with reef rock, anaerobic conditions are achieved by the porosity and the depletion of oxygen by the aerobic process at the surface. Excessive flow rates should, therefore, be avoided, as they may impede development of an adequate anaerobic environment to support denitrifying bacteria. de❊nitrate is also an excellent media for aerobic nitrification and it makes an ideal biological filter in drip trays, canister filters, sumps, or even box filters. At high flow rates (greater than 100 US gallons per hour), it will function solely as an aerobic filter. At slow flow rates (less than 50 US gallons per hour), it will function as both an aerobic filter and an anaerobic denitrifying filter.
Directions: For best results, de❊nitrate should be placed to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 US gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once de❊nitrate has been in use for several days, nitrate concentrations should start to fall and level off gradually at a concentration of about 4–5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of de❊nitrate treats about 100–200 L (25–50 US gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.
Seachem SafeRegular price Dhs. 72.50 Save Dhs. -72.50
Seachem Safe is the complete and super-concentrated dry conditioner for both fresh and salt water. Safe removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Safe will not over-activate skimmers. Safe may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard. When adding new fish, use Stability. Both are ideal for use with Safe.
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem Digital Spoon Scale.
NOTE: These directions supersede all other prior packaging. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
JBL BiotopolRegular price Dhs. 22.50 Save Dhs. -22.50
JBL Biotopol is a water conditioner for freshwater aquariums. For setting up of new aquariums or for adding during water changes - this conditioner is suitable for fish and plants and also for turtle tanks. Also suitable for the strengthening fish after diseases. The product binds dangerous substances in tap water: neutralises copper, lead and zinc, as well as chlorine and chloramine for healthy water and healthy fish. It aids in the protection of mucous membrane, gills, skin and fins with added aloe vera. Protection against stress and strengthening of the immune system thanks to vitamin B complex.
To use: 10ml per 40litres of water.
Dymax BioSphereRegular price Dhs. 67.50 Save Dhs. -67.50
With added prebiotics, Dymax BioSphere is a highly porous filtration media designed to be a substrate for bio-filtration, specifically remove ammonia and nitrite (nitrification) and reduce nitrate (denitrification) for freshwater, marine, and reef aquaria. Each litre of the media provides over 750sqm of surface area. This product cultivates nitrifying bacteria on its outer sphere and denitrifying bacteria in the inner, thus provide exceptional efficiency to eliminate toxic substances and prevent algae growth. Directions for use: Use 1L of BioSphere per 250 liters of water. BioSphere is suitable for all types of filtration systems, particularly effective in a canister filter. Rinse through water before use. Package size: 1 Liter.
Dymax Hose Pipe BrushRegular price Dhs. 28.50 Save Dhs. -28.50
The Dymax Hose Pipe Brush is made of high quality stainless steel spring that can be bent to your requirement and will not lose its form. Double ended long brush, suitable for cleaning Pipes and glass tubes with a diameter between 15-35mm. Especially useful for bent pipes, like U-shape tubes. Usage: Slowly push stainless steel spring into the pipe.
Dymax Power Head Pump SeriesRegular price Dhs. 48.50 Save Dhs. -48.50
The innovative Dymax power head series offers a relatively inexpensive yet high quality water pump. The Dymax Power Head Pump Series generates high head pressure with significant energy efficiency while operating ultra-quietly. These pumps have become known for their reliability and durability for both freshwater and saltwater applications. Dymax power head is a submerged motor-driven pump which have become the basic components of all Dymax filter systems and are also used as circulation pumps. Dymax power head pumps are continuously tested for their ecological effects under realistic conditions. Used as circulation pump and fountain, they do not produce harmful shearing forces. Every power head pump includes a universal holder and a flow rate control valve.
PH200 offers a flow rate of 200 litres per hour (78 gallons per hour) with 5W wattage and suitable for aquariums of 5-10 liters in size.
PH400 offers a flow rate of 400 litres per hour (105 gallons per hour) with 5W wattage and suitable for aquariums of 25-60 liters in size.
PH600 offers a flow rate of 600 litres per hour (158 gallons per hour) with 15W wattage and suitable for aquariums of 45-100 liters in size.
PH800 offers a flow rate of 800 litres per hour (210 gallons per hour) with 18W wattage and suitable for aquariums of 60-180 liters in size.
PH1200 offers a flow rate of 1200 litres per hour (317 gallons per hour) with 25W wattage and suitable for aquariums of 100-250 liters in size.
PH1800 offers a flow rate of 1800 litres per hour (457 gallons per hour) with 38W wattage and suitable for aquariums of 200-350 liters in size.
PH2500 offers a flow rate of 2500 litres per hour (660 gallons per hour) with 50W wattage and suitable for aquariums of 300-650 liters in size.
PH5000 offers a flow rate of 5000 litres per hour (1320 gallons per hour) with 125W wattage and suitable for aquariums of 700-1800 liters in size.
Seachem PristineRegular price Dhs. 31.50 Save Dhs. -31.50
Seachem Pristine uses bio-augmentation, a non-chemical and natural method, to improve water quality. It provides bacteria that break down excess food, waste and detritus in freshwater and marine systems. It will also reduce excess nutrients (e.g. ammonia, nitrates, and nitrites) that may fuel the growth of nuisance and disease-causing organisms. Pristine increases water clarity and promotes overall better health for the aquatic environment.
The species of bacteria in Pristine are a unique blend, specifically developed for hardiness and their ability to adapt to a wide variety of environmental conditions.
The bacteria species in Pristine thrive in fresh or salt water and can utilize a wide range of organic compounds, including fats that can cause unsightly films. Unlike traditional nitrifying bacteria, this bacterial blend can adapt to harsh or low oxygen environments and continue to multiply and improve water conditions. Biopolymers produced by established bacterial colonies trap particulates and increase water clarity.
Directions: Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons). Then use a maintenance dose of 1 capful (5 mL) per 80 L (20 US gallons) with additions of livestock or the disruption of the biofilter through cleaning or medications. Antibiotics should be removed with fresh carbon and a water change before adding bacteria. Allow 2 or 3 days for the bacteria to become established before using UV sterilizers or ozone. Recurring problems with high nutrients can indicate overstocking, overfeeding or inadequate filtration.
Product shelf life is 4 years from date of manufacture.
ADA Bacter 100Regular price Dhs. 128.50 Save Dhs. -128.50
Containing more than 100 different kinds of micro organisms in a dormant state. Bacter 100 improves the conditions in the substrate and the aquarium water and then stabilizes the eco-system within the aquarium. To be applied at the bottom of the substrate at setup or to the aquarium water when necessary. 100g resealable tub.
Seachem Head Start Combo Pack (3x100ml)Regular price Dhs. 72.50 Save Dhs. -72.50
Seachem HeadStart Combo Pack is a pack of conditioners that combines 3x of Seachem's top-selling items, Prime, Stability, and Clarity, (each 100ml bottle size) into one convenient pack. Each plays an important role in initial set-up and maintenance of any aquarium. It’s great for any aquarist but is ideal for the beginner.
Seachem Prime: Prime is the complete and concentrated conditioner for both fresh and saltwater. Prime removes chlorine, chloramine and detoxifies ammonia. Prime converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Prime may be used during tank cycling to alleviate ammonia/nitrite toxicity. Prime detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them.
Seachem Stability: Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate.
Seachem Clarity: Clarity is the ultimate clarifier for both fresh and saltwater. It employs an advanced polymeric flocculating agent that is both reef and plant safe. Clarity contains compounds that will clear all types of cloudiness in all environments. Clarity contains both precipitating and flocculating agents in the same bottle, enabling all types of cloudiness to be removed in one dose. Clarity is the only clarifier on the market that does it all!
Seachem Neutral Regulator (250ml)Regular price Dhs. 45.00 Save Dhs. -45.00
Seachem Neutral Regulator
Seachem Clarity (250ml)Regular price Dhs. 48.00 Save Dhs. -48.00
Seachem Clarity is the ultimate clarifier for both fresh and saltwater. It employs an advanced polymeric flocculating agent that is both reef and plant safe. Clarity is the only clarifier on the market that does it all! Clarity will clear all types of clouding.
Many companies manufacture multiple products to clear up each type of cloudiness and each different environment (e.g. freshwater, marine, reef, etc.). Some companies have developed products that will clear most types of cloudiness, but their application requires two separate bottles of product. Clarity contains compounds that will clear all types of cloudiness in all environments.
Clarity contains both precipitating and flocculating agents in the same bottle, enabling all types of cloudiness to be removed in one dose. Upon adding Clarity to the water, you will see a cloudy haze begin to form. This is normal and means that Clarity is beginning to work. The water is filled with tiny pieces of floating matter that were not visible to the naked eye. Clarity makes those pieces of matter begin to clump together. As they clump together they form larger pieces of matter that are now visible, hence the cloudiness. Once this matter has clumped together, it is a simple matter of mechanical filtration to remove the residue. Matter that was once too small to get caught in filter media is now in large enough clumps. In order for Clarity to work effectively, you should have a filter with mechanical filtration (e.g., filter floss) connected to your aquarium.
Directions: Use 1 capful (5 mL) for every 80 L (20 US gallons). In some situations the cloudiness may increase after adding Clarity, however this is normal and is a sign that Clarity is actively working. Rapid clarification will follow (1–2 hours). In the case of chemical or particulate clouding clean filter floss or cartridge after tank clears.
Hobby Alder Cones (50 pcs)Regular price Dhs. 32.50 Save Dhs. -32.50
Alder Cones are harvested from black alders (Alnus glutinosa) and are extraordinary suppliers of important humins and tanning agents. Humins in the aquarium provide for plant growth by releasing nitrogen, phosphor and sulphur to the water, for a gentle decrease of the pH value and the water becoming of a natural yet crystal clear colouring, just as many of our aquarium inhabitants prefer it in their natural environment. Even for animals not originating from such regions, the Alder Cones offer additional benefits.
The tanning agents provide the benefit of naturally inhibiting germs harmful to your animals such as bacteria and fungi spores. Therefore, the use of Alder Cones is ideal also if you wish to promote the reproduction of your fish. It is only thanks to the ‘blackwater effect’ that animals become ready to spawn. The tanning agents will help greatly in avoiding fungal infestation of the spawn. Once the breed has hatched you can watch them develop and grow better and look for food particles on the Alder Cones. Shrimp and various other animals will frequent the small cones too in order to graze on them, grate at them or hide out.
- promote the vitality and well-being of your animals
- natural coloring of the water – indispensable for many species
- slight decreasing and stabilization of the pH value
- gentle repression of unwanted bacterial growth
- blocks fungi to prevent fungal infections and infestation of spawn
- willingly accepted as additional feed and hide out by shrimps, crabs and plecostomus
Use: Put the Alder Cones directly into the aquarium water. 1 cone is sufficient for approx. 10 - 20 liters. The cones will sink to the aquarium bottom within a few minutes and start releasing their active agents soon. The Alder Cones should be replaced every 2 - 3 weeks. The used cones may stay in the aquarium as additional fee for crabs and shrimps or may be discarded. Our Alder Cones can be kept almost infinitely if stored at a dry place. As they are a pure natural product, they may vary in form, color and size.
Seachem Flourish Potassium (250ml)Regular price Dhs. 44.00 Save Dhs. -44.00
Seachem Flourish Potassium contains 50,000 mg/L of potassium suitable for the natural planted aquarium. Potassium is one of several elements that are vitally important to maintaining a vigorous level of growth in a planted aquarium. Potassium can become depleted in a rapidly growing system or when the source water has a low mineral content. In these cases potassium could become the limiting factor to growth. Use Flourish Potassium to prevent potassium depletion (signs of which include yellowing in older leaves) and maintain the highest level of growth.
The most easily obtained sources of potassium are potassium nitrate and potassium phosphate. Both of these sources add to either nitrogen or phosphorus as well as potassium, making it virtually impossible to target a specific NPK ratio. Flourish Potassium is derived from potassium sulfate, allowing the user to adjust potassium levels without affecting nitrogen or phosphorus.
Directions: Use 1 capful (5 mL) for every 125 L (30 US gallons). This dose raises potassium by 2 mg/L. Repeat 2–3 times per week or as needed in response to signs of potassium deficiency in older leaves which include: chlorosis (yellowing), necrosis (death/browning), pinholes in leaves, and weak stems and roots.
Seachem Flourish Phosphorus (250ml)Regular price Dhs. 44.00 Save Dhs. -44.00
Phosphorus is one of the main three macro nutrients (nitrogen, phosphorous, potassium: NPK) required by plants and can often become the limiting factor to growth in a flourishing system. Seachem Flourish Phosphorus is a safe solution (4,500 mg/L phosphate) of potassium phosphate that takes the guess work out of phosphate dosing. Unlike competing products that mix nitrate and phosphate in a fixed ratio, Seachem Flourish Phosphorus (being nitrate free) allows you to dose phosphorus according to the needs of your plants without the risk of overdosing nitrates. When used as directed, Seachem Flourish Phosphorus will enhance and accelerate the growth of aquatic plants without enhancing algae growth. For maximum benefit, use with Flourish Nitrogen and Flourish Potassium. Seachem Flourish Phosphorus is safe for invertebrates such as shrimp.
Use 2.5 mL (half a cap) for each 80 L (20 US gallons) once or twice a week or as needed in response to signs of phosphorus deficiency (e.g. stunted growth, plant dark green).
The beginner dose raises phosphorus by 0.05 mg/L (0.15 mg/L phosphate). The ideal phosphate level will vary, but generally ranges from 0.15–1.0 mg/L. Use MultiTest™ Phosphate to monitor phosphate levels. To target a specific phosphate increase, dose according to the following formula: 0.8vp=m, where v= volume of tank in gallons, p=desired phosphate increase and m=volume of product to use in mL. For example to raise 20 gallons to 0.1 mg/L phosphate you would use: 0.8*20*0.1=1.6 mL.
Seachem Flourish Nitrogen (250ml)Regular price Dhs. 44.00 Save Dhs. -44.00
Nitrogen is one of the main three macro nutrients (nitrogen, phosphorus, potassium: NPK) required by plants and can often become the limiting factor to growth in a flourishing system. Seachem Flourish Nitrogen is a concentrated (15,000 mg/L) blend of nitrogen sources. It provides nitrogen in both the nitrate form and the plant–preferred ammonium form. However, no free ammonia is released because the ammonium in Flourish Nitrogen is complexed and unavailable until utilized by the plants. Ammonium becomes available after conversion of urea (carbamide). Flourish Nitrogen also provides nitrate for those plants that can readily utilize nitrate as well. For maximum benefit, use with Flourish Phosphorus and Flourish Potassium. Flourish Nitrogen is safe for invertebrates such as shrimp.
Use 2.5 mL (half a cap) for each 160 L (40 US gallons) twice a week or as needed in response to signs of nitrogen deficiency (e.g. stunted growth, chlorosis). For smaller doses, please note that each cap thread is approximately 1 mL.
The beginner dose raises nitrogen by the same degree that 1 mg/L nitrate would. This dose is sufficient to provide approximately 4 g of growth (dry) or about 20 g (hydrated) over a 1 month period (assuming all other necessary nutrients are provided). For increased growth use proportionately more.
To target a specific nitrogen increase, dose according to the following formula: 0.25vn=m, where v= volume of tank in gallons, n=desired nitrogen increase (if using a “nitrate equivalent” value for “n” then use a factor of 0.05 instead of 0.25 in the formula) and m=volume of product to use in mL. For example to raise 20 gallons by 0.20 mg/L nitrogen you would use: 0.25*20*0.20=1 mL.
Because one-half of the nitrogen in Flourish Nitrogen is from nitrate you can get a reasonable estimate of nitrogen levels by doubling a nitrate reading.