Wide range of innovative and effective aquarium supplies for freshwater environments, saltwater environments, reefs and ponds.
Seachem PrimeRegular price Dhs. 27.50 Save Dhs. -27.50
Seachem Discus Trace (250ml)Regular price Dhs. 48.50 Save Dhs. -48.50
Seachem Discus Trace supplies a broad range of trace elements demonstrated* to be necessary for proper ﬁsh health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Discus Trace contains only those elements actually demonstrated* to be required by fish.
Aquarium salt is often used to add salts back to aquarium water. Some fish will tolerate this therapeutic use of salt; however, some fish are less tolerant. Discus as a species will not tolerate this elevated level of sodium in the water. If you keep live plants in your discus aquarium, the plants will not tolerate this either. Discus Trace is a well rounded trace mineral supplement that does not contain sodium and is used to replenish trace and ultra trace minerals that are demonstrated to be necessary for fish health and growth.
*Nutrient Requirements of Fish, National Academy of Sciences, pp. 16-21,1993.
Directions: Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. Feed NutriDiet Discus Flakes for optimal fish health.
Seachem ParaguardRegular price Dhs. 40.00 Save Dhs. -40.00
Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available (for parasites on fish). Unlike highly toxic and difficult to use formalin based medications, ParaGuard contains no formaldehyde or methanol and will not alter pH. ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot). It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.
ParaGuard is appropriate for treating a variety of parasitic infections of exotic fish. Below are some of the more common infections treatable with ParaGuard. Be aware that many diseases and infections share similar physical and behavioral symptoms, e.g. clamped fins, lesions, loss of appetite.
Seachem StabilityRegular price Dhs. 27.50 Save Dhs. -27.50
Seachem Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate. The bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use. Stability is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management.
The bacteria used in competing products are inherently unstable. The conditions necessary for their growth and development fall into a very narrow range of temperatures, pH, organic loads, etc. When any of these parameters are not strictly within the proper range, the bacterial culture quickly crashes and dies. Stability is not limited this way. The necessary conditions for the growth of Stability's bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the undetected death of an organism), Stability simply becomes more effective.
Directions: Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. Product shelf life is 4 years from date of manufacture. Stability should ideally be used in conjunction with biological filtration such as Seachem Matrix. For emergency ammonia control, use Seachem AmGuard.
Seachem SafeRegular price Dhs. 72.50 Save Dhs. -72.50
Seachem Safe is the complete and super-concentrated dry conditioner for both fresh and salt water. Safe removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Safe will not over-activate skimmers. Safe may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard. When adding new fish, use Stability. Both are ideal for use with Safe.
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem Digital Spoon Scale.
NOTE: These directions supersede all other prior packaging. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
Seachem NutriDiet BettaRegular price Dhs. 22.00 Save Dhs. -22.00
Seachem NutriDiet Betta contains only the highest quality ingredients (Chlorella algae & fish meal) without low nutritional value fillers (e.g. corn meal). It contains a broad spectrum of all the important components needed in a Betta’s diet: protein, fat, carbohydrates, vitamins and minerals. NutriDiet Betta is different from other foods on the market because of its high nutritional value and palatability. NutriDiet Betta also contains probiotics, which reduce waste, benefit nutrient uptake and support the immune system.
Directions: Feed daily. Add as many pellets as each Betta will consume within 2 minutes.
Seachem MatrixRegular price Dhs. 72.00 Save Dhs. -72.00
Seachem Matrix is a high porosity biomedia that provides efficient biofiltration for the removal of nitrogenous waste. Matrix is a porous inorganic solid about 10 mm in diameter. Each liter of Matrix provides as much surface (>~700 m2) as 170 liters of plastic balls! Plastic bio-materials provide only external surface area, whereas Matrix provides both external and internal macroporous surface area. These macropores are ideally sized for the support of nitrifying and denitrifying bacteria. This allows Matrix, unlike other forms of biomedia, to remove nitrate along with ammonia and nitrite, simultaneously and in the same filter. Matrix is completely inert and will not breakdown. It need not be replaced. Since the majority of the bacteria are internal, Matrix may be rinsed when needed without damaging the filter. Matrix is compatible with all types of wet or wet-dry filters.
Directions: Use 250 mL of Matrix for each 200 L (50 US gallons)** of water. Matrix may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix is sufficiently large that no filter bag should be required for most applications. Matrix works well in drip tray systems, but you may find that the larger Pond Matrix is better suited for such applications. Use with Stability to more rapidly establish the bio-filter.
**This dosage may differ from your packaging. Based on updated studies, we've found Matrix treats even more water than previously asserted.
Seachem GarlicGuardRegular price Dhs. 44.00 Save Dhs. -44.00
Seachem GarlicGuard is an all natural garlic scented odor and flavor enhancer for freshwater and saltwater fish. Our research has shown that many fish are attracted to natural odors, such as garlic. Simply mix GarlicGuard with any food item, such as Seachem’s NutriDiet Flakes, to attract the interest of finicky eaters, e.g. discus and marine angelfish. GarlicGuard is safe for reef and planted aquariums.
Directions: Shake well before use. Soak food in GarlicGuard before feeding. Safe for use with medicated foods (to attract the interest of finicky eaters to the medicated food). For example, for enhanced effectiveness against Ich and other parasites use Seachem’s Focus and MetroPlex as follows: Add 1 measure of MetroPlex to 1 measure of Focus per tablespoon of food. Completely soak this food mix in GarlicGuard, refrigerate, and feed once or twice daily for 1–2 weeks.
Seachem de-nitrateRegular price Dhs. 20.00 Save Dhs. -20.00
Seachem de❊nitrate is an economical, natural, porous material with a pore distribution and geometry that promotes both aerobic nitrification within the first few millimeters of depth and anaerobic denitrification at the core. The material has a high surface area and supports a high density of bacteria. Although de❊nitrate has capacity to trap nitrate, this, as with other nitrate retaining materials, such as certain zeolites and synthetic resins, is quite limited and the primary mechanism of nitrate removal is anaerobic. “Live” rocks or reef rocks remove nitrate by anaerobic denitrification. de❊nitrate removes nitrate by the same process. Efficiency is magnified several folds by forcing the water to filter through the porous de❊nitrate. As with reef rock, anaerobic conditions are achieved by the porosity and the depletion of oxygen by the aerobic process at the surface. Excessive flow rates should, therefore, be avoided, as they may impede development of an adequate anaerobic environment to support denitrifying bacteria. de❊nitrate is also an excellent media for aerobic nitrification and it makes an ideal biological filter in drip trays, canister filters, sumps, or even box filters. At high flow rates (greater than 100 US gallons per hour), it will function solely as an aerobic filter. At slow flow rates (less than 50 US gallons per hour), it will function as both an aerobic filter and an anaerobic denitrifying filter.
Directions: For best results, de❊nitrate should be placed to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 US gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once de❊nitrate has been in use for several days, nitrate concentrations should start to fall and level off gradually at a concentration of about 4–5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of de❊nitrate treats about 100–200 L (25–50 US gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.
Seachem Ammonia AlertRegular price Dhs. 49.50 Save Dhs. -49.50
Seachem Ammonia Alert is an innovative color device for continuously detecting and monitoring toxic free ammonia. A sensor changes reversibly from yellow to green to blue, relative to the ammonia concentration. No test kits, chemicals, or procedures are needed. The device detects less than 0.05 mg/L (ppm) free ammonia and alerts you to the #1 killer before any sign of stress. It lasts over a year. This product is not recommended for use at acid pH. Marine or freshwater use. In the absence of free ammonia the unit will assume a yellow or faint yellow-green color. It is normal for the dry sensor to have a greenish hue. It may take up to a few days for a dry sensor to equilibrate with the water. No sampling of water, chemicals, or test procedures are required. The presence of the free ammonia is detectable continuously with a response time of about 15 minutes. Response to decreasing ammonia is slower, requiring about 4 hours to go from TOXIC to SAFE on removal of ammonia. It's small, clear, and unobtrusive, so it won't detract from the view of your aquarium. As little as 0.02 mg/L of free ammonia will produce a greenish hue on the detector surface. This corresponds to a total ammonia (both ionized and free ammonia) of 0.25 mg/L in marine water at pH 8.3. In freshwater at pH 7.0, this corresponds to 3.6 mg/L total ammonia.
Free ammonia is much more toxic than ionized ammonia. As free ammonia, the ALERT color corresponds to about 0.05 mg/L, ALARM to about 0.2 mg/L, and TOXIC to about 0.5 mg/L. Administering a water change should be considered for any indication other than SAFE. The ALERT concentration is tolerated for 3-5 days, ALARM for 1-3 days, and TOXIC is rapidly harmful, requiring immediate attention. For emergency ammonia removal, treat with AmGuard. No care is required beyond removing algae with a clean, soft material. Avoid touching the sensor with fingers, since skin oils can damage it. Do not use bleach, soap, detergents or hard objects to clean the sensor. Some dye medications may discolor the sensor. Sensitivity improves with age, provided the unit is not allowed to dry out, however, drying does not permanently impair the unit. For maximum sensitivity, the unit should be read under natural daylight or daylight simulating light. Red enhancing light minimizes green and blue hues, decreasing the apparent sensitivity of the unit. The response of the unit may be checked by holding it briefly over the mouth of an ammonia bottle: color should develop rapidly.
Seachem StressGuard 250mlRegular price Dhs. 54.50 Save Dhs. -54.50
Seachem StressGuard is the premium slime coat protection product. StressGuard will reduce stress and ammonia toxicity whenever handling or transporting ﬁsh. StressGuard binds to exposed protein in wounds to promote healing of injured ﬁsh and to reduce the likelihood of primary and secondary infections. StressGuard is compatible with all medications except those that are copper based. StressGuard is not amine based and will not interfere with Purigen; or HyperSorb regeneration. StressGuard does not coat resins or clog filtration like competing “slime coat” type products can. What makes StressGuard very successful at healing is the fact that it contains protein active colloids. This protein active colloidal agent actively seeks out any wounds, abrasions, or places where exposed proteins are and attaches to this area to help directly deliver the disinfectant in the product and start the healing process. This protein active colloid, because it binds to the exposed proteins, also acts like a liquid bandage to the abrasion. Some products are marketed to be squirted in the bag when a fish is purchased. Those products are generally acidic, with some brands being a very strong acid. Putting such a product in a small, enclosed container with a fish often does more harm than any intended good. StressGuard has a pH of 7.0. It will not affect the pH of an aquarium, even at large doses. There are no other products on the market that can compare to the effectiveness of StressGuard.
Directions: Use 1/2–1 capful (2.5–5 mL) to every 40 L (10 US gallons) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.
Seachem PurigenRegular price Dhs. 61.00 Save Dhs. -61.00
Seachem Purigen is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%. Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigen’s impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use. Purigen removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%.
Directions: Rinse before use. Use in a fine mesh (180 micron or less) filter bag such as Seachem’s The Bag. For best results, Purigen should be placed so as to maximize the flow of water through it. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Each 250 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.
Regeneration: Soak in a 1:1 bleach:water solution for 24 hours in a non-metallic container in a well ventilated area and away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 4 tablespoons of Prime, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak for 4 hours with a solution containing 2 tablespoons of buffer per cup of water (Discus Buffer, Neutral Regulator). Original color and full activity should now be restored and Purigen is ready for reuse. Caution: some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.
Seachem PristineRegular price Dhs. 31.50 Save Dhs. -31.50
Seachem Pristine uses bio-augmentation, a non-chemical and natural method, to improve water quality. It provides bacteria that break down excess food, waste and detritus in freshwater and marine systems. It will also reduce excess nutrients (e.g. ammonia, nitrates, and nitrites) that may fuel the growth of nuisance and disease-causing organisms. Pristine increases water clarity and promotes overall better health for the aquatic environment.
The species of bacteria in Pristine are a unique blend, specifically developed for hardiness and their ability to adapt to a wide variety of environmental conditions.
The bacteria species in Pristine thrive in fresh or salt water and can utilize a wide range of organic compounds, including fats that can cause unsightly films. Unlike traditional nitrifying bacteria, this bacterial blend can adapt to harsh or low oxygen environments and continue to multiply and improve water conditions. Biopolymers produced by established bacterial colonies trap particulates and increase water clarity.
Directions: Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons). Then use a maintenance dose of 1 capful (5 mL) per 80 L (20 US gallons) with additions of livestock or the disruption of the biofilter through cleaning or medications. Antibiotics should be removed with fresh carbon and a water change before adding bacteria. Allow 2 or 3 days for the bacteria to become established before using UV sterilizers or ozone. Recurring problems with high nutrients can indicate overstocking, overfeeding or inadequate filtration.
Product shelf life is 4 years from date of manufacture.
Seachem pH AlertRegular price Dhs. 49.50 Save Dhs. -49.50
Seachem pH Alert is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously. A sensor changes color reversibly from yellow to orange to red alerting you to shifts in pH levels between 5.4 and 8.0. Freshwater use only.
Seachem pH Alert is almost half the size of competing products. It's small, clear, and unobtrusive, so it won't detract from the view of your aquarium.
Simply place pH Alert visibly anywhere in the aquarium or filter and match the sensor color to the corresponding pH reading on the color wheel. It’s that easy. No chemicals or test procedures are required. When first put in service, response time will be about 30 minutes. Thereafter, pH shifts will register within ten minutes.
Care: No care is required beyond removing algae with a clean, soft material. Do not use bleach, soap, detergents or hard objects to clean the sensor. Some dye medications may discolor the sensor. For maximum sensitivity, the unit should be read under natural daylight or daylight simulating light. Sensor exhaustion is indicated by a visible fading or washing out of sensor color. Once exhausted, it is time to replace pH Alert
Seachem Gold Trace (250ml)Regular price Dhs. 39.00 Save Dhs. -39.00
Seachem Gold Trace supplies a broad range of trace elements demonstrated* to be necessary for proper ﬁsh health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Gold Trace contains only those elements actually demonstrated* to be required by fish.
*Nutrient Requirements of Fish, National Academy of Sciences, pp. 16-21,1993.
Directions: Use 1 capful (5 mL) for every 80 L (20 US gallons) twice a week. Feed NutriDiet Goldfish Flakes for optimal fish health.
Seachem "The Bag"Regular price Dhs. 44.50 Save Dhs. -44.50
Seachem "The Bag" is an innovative welded filter bag with a durable non-stitched seam. It has a 180 micron mesh, is resistant to bleach, caustics, and acids, and comes with a convenient resealable locking closure. It is available in a convenient 5" x 9.5" size. It is ideal for all filtration products and has an exceptionally long life.
Unlike stitched seams, welded seams are not subject to degradation from exposure to bleach, caustics, acids, or other harsh environmental exposure likely to take place during regeneration of filter media. Caution should be excercised, however, to avoid overfilling or over-packing as welded seams can be forced to separate by excessive pulling forces.
Directions: Simply place desired filtration material e.g. Purigen, CupriSorb, etc. and close The Bag using the resealable locking closure. For best results, The Bag should be placed so as to maximize the flow of water through it.
Seachem PhosguardRegular price Dhs. 37.00 Save Dhs. -37.00
Seachem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. Although PhosGuard is effective in both fresh and marine water, it will operate better in sea water and the need for it is better defined in sea water. It is not recommended for phosphate buffered freshwater (PhosGuard would remove the buffer until saturated). PhosGuard is highly porous and bead-shaped to promote easy water ﬂow through and around it, thereby increasing both its efficiency and capacity.
Directions: May generate heat on initial contact with water. Pre-wet by adding to a double volume of freshwater, followed by a rinse. For best results, PhosGuard should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag is recommended. Use 85 mL (1/3 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest Phosphate or MultiTest Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosGuard is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.
Seachem Nourish (250ml)Regular price Dhs. 72.00 Save Dhs. -72.00
Seachem Nourish is a comprehensive vitamin, amino acid, and trace element supplement developed to address nutritional requirements commonly associated with long term closed system housing of freshwater ornamental fish. Nourish contains potassium iodide in a heavy base of spirulina and chlorella. The nutrient iodine is essential for the biosynthesis of the thyroid hormones thyroxine and triiodothyronine.* Both spirulina and chlorella contain a rich assortment of amino acids and vitamins. Nourish can be used on marine ornamental fish; however, it is specifically designed for freshwater fish.
*Nutritional Requirements of Fish, The National Research Council of the National Academy of Sciences, National Academy Press, Washington, DC, 1993, p. 21.
Directions: Shake well before using. For best results, soak fish food, such as Seachem’s NutriDiet Flakes, in one capful of Nourish daily.
Seachem Head Start Combo Pack (3x100ml)Regular price Dhs. 72.50 Save Dhs. -72.50
Seachem HeadStart Combo Pack is a pack of conditioners that combines 3x of Seachem's top-selling items, Prime, Stability, and Clarity, (each 100ml bottle size) into one convenient pack. Each plays an important role in initial set-up and maintenance of any aquarium. It’s great for any aquarist but is ideal for the beginner.
Seachem Prime: Prime is the complete and concentrated conditioner for both fresh and saltwater. Prime removes chlorine, chloramine and detoxifies ammonia. Prime converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Prime may be used during tank cycling to alleviate ammonia/nitrite toxicity. Prime detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them.
Seachem Stability: Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate.
Seachem Clarity: Clarity is the ultimate clarifier for both fresh and saltwater. It employs an advanced polymeric flocculating agent that is both reef and plant safe. Clarity contains compounds that will clear all types of cloudiness in all environments. Clarity contains both precipitating and flocculating agents in the same bottle, enabling all types of cloudiness to be removed in one dose. Clarity is the only clarifier on the market that does it all!
Seachem Gold Salt (300g)Regular price Dhs. 44.00 Save Dhs. -44.00
Seachem Gold Salt is designed to provide the optimal environment for all goldfish species. The use of Gold Salt also aids in the prevention of nitrite poisoning. The salt is also well suited for routine aquarium freshwater use. It does not impact pH or provide buffering. For pH control use Gold Buffer. For dechlorination use Gold Basics. For further goldfish environment enhancement, use Gold Trace to restore the proper level of trace elements and feed NutriDiet Goldfish Flakes for thriving, healthy goldfish.
Directions: Use 18 g (1 tablespoon) for each 40 L (10 US gallons). Use when setting up an aquarium and when making water changes. To add salt to an established tank, do so gradually. It is best to dissolve the salt in a small amount of freshwater before use. Avoid using salt when replacing evaporated water.
Seachem FlouriteRegular price Dhs. 59.50 Save Dhs. -59.50
Seachem Flourite is a specially fracted stable porous clay gravel for the natural planted aquarium. Its appearance is best suited to planted aquaria, but may be used in any freshwater aquarium environment. Flourite is most effective when used alone as an integral substrate bed, but it may be mixed with other gravels.
SET-UP: Although it is pre-washed, because Flourite is a natural product, it may become dusty in transit and require rinsing before use to remove any residual dust. When adding water to aquarium, fill slowly to avoid disturbing Flourite substrate bed. Place a bowl in the aquarium and add water directly to the bowl, allowing water to overflow softly on to the gravel bed. Initial cloudiness is normal. To remove cloudiness, use mechanical filtration (such as filter floss). Use Clarity to accelerate clearing.
Seachem Flourish AdvanceRegular price Dhs. 53.50 Save Dhs. -53.50
Seachem Flourish Advance is an all-natural, biologic growth enhancer for aquatic plants. Its advanced formula contains phytohormones, minerals, and nutrients that dramatically stimulate the growth of both roots and shoots in aquatic plants. Phytohormones are a group of naturally occurring compounds that play crucial roles in regulating plant growth in a wide range of developmental processes, including cell division, formation and activity of shoot meristems, induction of photosynthesis gene expression, leaf senescence, nutrient mobilization, seed germination, root growth and stress response. Used regularly, it also enhances mineral absorption and improves disease resistance. It is non-toxic and completely safe for all plant varieties as well as for fish and aquatic organisms. During the first ten to fourteen days after application, Flourish Advance works to stimulate root growth beneath the surface. After this initial induction period, significantly enhanced growth in the leaves and stems of the plants will occur.
Directions: Shake well before use. Use 1 capful (5 mL) for every 80 L (20 US gallons). Dose daily or as required to maintain plant growth.